How to Read a Bar Graph
Published: . Last updated:
Here's how to read a bar graph in five steps. Work out how much each gridline is worth before you read any bar.
- Read the title
- Read the axes, labels and units
- Find the scale and gridline interval
- Read and compare the bars
- Check the source and sample
Learn faster by building one: try the free bar graph maker.
On this page
What you are looking at
A bar graph uses the length of each bar to show a value for a category. OpenStax describes bar graphs as bars that are separated from each other, and notes that the bars can run vertically or horizontally. So whether the bars stand up or lie sideways, you read them the same way: find where each bar ends and match that point to the number scale.
If you need a refresher on the parts themselves, start with what a bar graph is. If you are not sure a chart is even a bar graph (histograms look similar), see the types of graphs used in math.
How to read a bar graph in 5 steps
1. Read the title
The title tells you the question the chart answers. The NCES Kids' Zone guide puts it simply: the title is a short explanation of what is in the graph. Say it back to yourself in plain words, like "this shows how many books each class read in March."
2. Read the axes, labels and units
One axis lists the categories (classes, months, pets). The other axis is the value axis, the one with numbers. Look for the unit on the value axis label: books, dollars, percent, thousands of people. A bar reading "4" means something very different if the label says "millions."
3. Find the scale and gridline interval
Pick two labeled numbers next to each other on the value axis and subtract. If the labels go 0, 10, 20, 30, each labeled line is worth 10. If there are unlabeled gridlines in between, divide that gap by the number of spaces. Four spaces between 0 and 20 means each line is worth 5.
Check where the value axis starts. If it does not start at 0, bar lengths will exaggerate differences.
4. Read and compare the bars
Follow the end of each bar straight across (or straight down, for horizontal bars) to the value axis and read the number. A ruler or the edge of a sheet of paper keeps your eye level. Then compare: which bar is longest, which is shortest, and how far apart are they? Most test questions ask for a difference (subtract), a total (add) or a "how many times as many" (divide).
5. Check the source and sample
Look under the chart for where the data came from. NCES lists the source as one of the parts of a bar graph, because it gives credit and tells you who collected the numbers. Also ask how many people or things were counted. A survey of 12 students and a survey of 1,200 can draw the same bar heights but deserve very different levels of trust.
Worked example
Here is a simple bar graph of books read by four classrooms (example data). Walk through the five steps with it.
- Title: books read in March by classroom.
- Axes: the categories are classrooms; the value axis counts books.
- Scale: gridlines every 10 books, starting at 0.
- Read the bars: Room 101 reaches 35, Room 102 reaches 55, Room 103 reaches 20, Room 104 reaches 45.
- Compare: Room 102 read the most and Room 103 the fewest. The difference is 55 minus 20, which is 35 books. Together the four rooms read 35 + 55 + 20 + 45 = 155 books.
Room 101, Room 102 and Room 104 all end halfway between gridlines. That is the next skill.
Reading values between gridlines
Bars rarely land exactly on a line. When a bar stops between two gridlines:
- Note the gridline just below the bar and the one just above it.
- Estimate what fraction of the gap the bar covers: about a quarter, half or three quarters.
- Multiply that fraction by the gridline interval and add it to the lower line.
In the example, Room 101 stops halfway between 30 and 40. Half of a 10-book gap is 5, so the value is 30 + 5 = 35. If a bar stopped about three quarters of the way from 40 to 50, you would estimate 40 + 7.5, or about 47 or 48.
Treat these as estimates. If the chart prints data labels on the bars, trust the labels over your eye. If a question asks for the nearest whole number and the bar ends between lines, give your best estimate and check whether your teacher or test accepts a close answer.
Reading double and stacked bar graphs
Double (grouped) bars
A double bar graph puts two bars side by side for each category, such as boys and girls in each grade. Check the legend first; NCES notes the legend tells you what each bar represents. Then compare in two directions: across the categories for one color, and within a pair to see which group is higher in that category. You can build your own to practice with the double bar graph maker.
Stacked bars
A stacked bar splits one bar into colored segments. The whole bar is the total. The trick is that only the bottom segment starts at zero, so for any other segment you cannot just read where it ends.
Segment value = the top of the segment minus the bottom of the segment.
In the stacked chart below (example data), the Grade 7 bar has Sports from 0 to 25, Music from 25 to 35, and Clubs from 35 to 50. Sports is 25, Music is 35 minus 25 = 10, and Clubs is 50 minus 35 = 15. The top of the bar, 50, is the grade total, and 25 + 10 + 15 = 50 confirms it.
Add your segments back up. If they do not match the top of the bar, one reading is off.
On a 100% stacked bar, every bar reaches 100 and each segment is a percent of that bar's total, not a count. The stacked bar graph maker can draw both versions from the same data so you can see the difference.
Reading error bars (the basics)
Some science and statistics charts show a thin line with small caps sticking out of the top of each bar. Those are error bars. The bar usually shows an average (mean), and the error bar shows how much the data varies or how uncertain that average is.
- Read the bar top as the average, the same way as any bar.
- Read the top and bottom of the error bar on the value axis to get the range it covers.
- Check the caption to see what the error bar means: standard deviation (SD), standard error (SE) or a 95% confidence interval (CI). These are different measures and give different lengths for the same data.
- Longer error bars mean more spread or less certainty. Short bars mean the values sat close together or the estimate is tighter.
For more on what each type shows, and a tool to draw them, see bar graphs with error bars.
Traps that make bar graphs misleading
A value axis that does not start at zero
This is a common trap. Suppose two bars show 50 and 55 (example data), but the value axis starts at 45. The first bar is 5 units tall on screen and the second is 10, so the second looks twice as big even though it is only 10% bigger. Atlassian's bar chart guide advises plotting bars against a zero baseline because it makes lengths easier to compare and keeps the chart truthful. When you see a cut-off axis, read the numbers, not the heights.
Uneven scales
Check that the gridlines go up by equal steps. An axis labeled 0, 10, 20, 50, 100 squeezes the large values together. Also watch for two charts placed side by side with different scales; equal-looking bars can stand for very different numbers.
3D effects
Tilted, shaded 3D bars make it hard to tell which edge lines up with the axis. Atlassian recommends avoiding 3D effects for exactly this reason. If you have to read one, use the front top edge of the bar and expect some error.
Missing units or labels
A bar that reaches "30" with no unit could be 30 people, 30 percent or 30 thousand dollars. If the axis label, unit or legend is missing, say so in your answer instead of guessing.
Practice questions
Use the two charts on this page (both example data). Answers are below each question.
- Books chart: How many more books did Room 104 read than Room 101?
Answer: Room 104 read 45 and Room 101 read 35. 45 minus 35 = 10 more books. - Activities chart: In Grade 8, the Music segment starts at 18 and ends at 32. How many Grade 8 students chose music?
Answer: 32 minus 18 = 14 students. - Activities chart: Which grade has the most students in total, and how many more than Grade 6?
Answer: Grade 7, with 50 (25 + 10 + 15). Grade 6 has 40 (20 + 12 + 8). 50 minus 40 = 10 more students.
Want more practice? The bar graph examples page has more charts to read and work through.
Make one to see how it works
The fastest way to get good at reading bar graphs is to build a few and watch how the scale and bar lengths change when you edit a number. Type or paste your own data into the free bar graph maker, switch between simple, grouped and stacked bars, and download the chart as PNG or SVG. It runs in your browser with no sign-up.
Related guides
Frequently asked questions
How do you read a bar graph step by step?
Read the title, then the axis labels and units, then work out the scale by subtracting two neighboring axis numbers. Follow the end of each bar to the value axis to read its value, compare the bars, and finally check the source and sample size.
How do you find the scale on a bar graph?
Pick two numbers next to each other on the value axis and subtract. If the axis reads 0, 5, 10, 15, each gridline is worth 5, and a bar that ends halfway between 10 and 15 is about 12.5. For the names of every part of the chart, see what a bar graph is and its parts.
How do you interpret a bar graph?
Interpreting goes one step past reading values. Look for the biggest and smallest bars, the size of the gaps between them, and any pattern across categories. Then ask whether the scale, the starting point of the axis and the source support the conclusion you are drawing.
How do you read a stacked bar graph?
The top of the whole bar is the total. For each colored segment, subtract the value at the bottom of the segment from the value at the top. Only the bottom segment can be read directly from the axis.
Why is it misleading if a bar graph does not start at zero?
Bar graphs compare lengths. If the value axis starts above zero, part of every bar is cut off, so small differences look large. Read the actual numbers on the axis rather than comparing bar heights.
How this page is checked
Written by Cedrick Reese. The parts of a bar graph and the reading steps were checked against the NCES Kids' Zone graphing guide and OpenStax Introductory Statistics 2e, and the advice on zero baselines and 3D effects against Atlassian's bar chart guide. All chart values are labeled example data, every practice answer was recalculated from its data table, and the page is reviewed when those sources change.
Sources used on this page: